Ferro Manganese Medium Carbon

Brand Promise : Absolute Trust in Knowledge Partnerships

Home > Foundry and Steel Mill Supplies > Ferro Alloys > Ferro Manganese Medium Carbon

Ferro Alloys

Ferro Manganese Medium Carbon (McFeMn)

Application :
Manganese is intentionally present in most grades of steel and is a residual constituent of virtually all others. Aside from its historic importance as a desulfurizer and deoxidizer, manganese is undoubtedly the most prevalent alloying agent in steels, after carbon. Understandably, therefore, ferromanganese is the most widely used ferroalloy.
Of the 15 steelmaking manganese products recognized in ASTM standards, the most important is high carbon (standard) ferromanganese.
Manganese addition agents are generally chosen on the basis of carbon content. Inexpensive standard ferromanganese is used when the steel is oxidized (low in carbon) or when higher residual carbon contents are allowable. As maximum steel carbons become more restricted it is necessary to switch to the more costly low-or medium carbon ferroalloys. The final aim chemistry will determine which addition agents can or cannot be used. Silicon content is often a second deciding factor.
Medium Carbon Ferro Manganese is also used as an alloying constituent for : Tool steel - Stainless and heat resistance steel - structural steel and anti abrasion steel to name a few

Specification :
THEVA offers the following specifications of MedC FeMn

Medium Carbon Ferro Manganese (McFeMn 75)


CompositionSize
Element%(90% mm.)
Mn %75.00% min10 - 50 mm.
Si %1.20% max
C %7.00% maxPacking  :  In plastic woven bag 1,000 kgs.
and In 25 Kgs. PP Bags
P %0.25% max
S %0.02% max
*** Remark : Chemical Composition, Size and Packing can be adjusted by customer requirement

Medium Carbon Ferro Manganese (McFeMn 78)


CompositionSize
Element%(90% mm.)
Mn %78.00% min10 - 50 mm.
Si %1.20% max
C %1.50% maxPacking  :  In plastic woven bag 1,000 kgs.
and In 25 Kgs. PP Bags
P %0.15% max
S %0.02% max
*** Remark : Chemical Composition, Size and Packing can be adjusted by customer requirement