|
Product Group : Temperature
Measuring Instruments & Auxiliaries
Product :
ATEMS
represent Digital Pyrometer of Ajay Syscon India
TEMPSTICK 529
Application :
TEMPSTICK 529 has evolved totally to suit a harsh
and hostile industrial environment. It has proven to
be most dependable molten metal temperature
measuring instrument when used with associated BMD,
Thermotips or Minitips for furnace, ladle and
tundish in foundries and Steel Plants.
Salient
Features : Following are the salient
features of FERROLAB EXCEL
- Could be connected to PC to
get printout of Temperature with time, date, Dip
Station(Furnace), heat number
- Facility to see temperature
readings with furncae code numbers
- Easy to use, light weight,
portable and rugged unit.
- Plateau detection software
- Accuracy of +/- 1 Deg C due
to its microprocessor based technology
- Overall system accuracy of
+/- 3 Deg C
- Rechargeable Nickel-Cadmium
battery and automatic low battery indication
- Bright 0.6 digital display
- Automatic power shut-off
- Buzzer that indicates end of
measuring cycle
- No mechanical switches
- 1000 readings can be stored
in memory
- Choice of peak hold or
tracking mode in 529K
- Available with K or S/R/B
thermocouples.
|
|
Operation :
Specially designed for
noble metal T/C(S/R/B) type, the prometer from Ajay
Syscon can take temperatures of molten steel, cast
iron, copper, brass, bronze, alumunium. Alloys etc.
As you dip the Thermocouple Tip in molten metal, the
microprocessor reads the millivolts and
mathematically converts it, to give you the
temperature reading. The indicator lamps(LEDs) on
the front panel indicate and sound a buzzer as the
correct reading is displayed. This entire process
completes within 3 to 5 seconds, after which the
thermocouple tip is withdrawn.
|
|
 |
|
The microprocessor studies the temperature values and
detects exact temperature of molten metal with its
flat plateau detection method, thus rejecting
variation due to slag temperature differentials,
furnace hot spots, transient electrical spikes etc.
When used with a N.F. Probe(K-type), it is useful
for applications for lower temperatures and can be
used in Track/Peak Hold modes
Model 529 is used in Ferrous Foundries and Steel Plants.
Model 529K can be used with different types of
probes in non-ferrous foundries, fertilizer, sugar,
chemical pharmaceuticals, cement, paper, process
industries, metal processing and heat treatment shop
Technical Data :
|
Measuring Range |
540 deg C 1750 deg C S/R/B 0 1200 deg C K |
|
Operating temperature |
0 50 deg C |
|
Accuracy |
+/- 1 deg C |
|
Calibration Standard |
IPTS 68 |
|
Linearisation |
Over the entire measuring range |
|
Display |
4 digits, 7 segment LEDs Height 0.6 |
|
Power Supply |
4 Ni/Cd Battery 1.2 V each Type AA |
|
Indication of battery voltage |
480 545, 480 indicates charging needed and 545
indicates fully charged |
|
Temp detection method |
Flat Plateau 529R. Peak hold/track 529 K |
|
T/C element |
Pt/Pt Rh 10% %, 13%, 6/30% Cr/Al |
|
Response Time |
3 to 5 secs for 529R approx 30 seconds fro 529K
with N.F. Probe |
|
Housing |
Dust Proof Aluminum housing with handle |
|
Automatic cold junction compensation |
|
|
Weight with standard lance |
2.5kgs |
|
Memory capacity |
250/500/999 memories |
|
Printing Format |
Horizontal or vertical(factory selectable) |
|
Dip Station/Furnace code |
A, C, E, F, H, J, L, P, U(9 Alpha numeric) |
|
Error Codes |
If T/C breaks during measurement, 9999 is
displayed
If flat plateau is not detected, 9001 is
displayed
If hardware problem occurs, 9002 is displayed
In cases of reverse input, 622 is displayed |
|
|
|
